Laticrete Latapoxy 300

LATAPOXY 300 Adhesive is a chemical resistant, epoxy adhesive that will bond to most sound, clean surfaces. Adhesive spreads easily and cleans with water while fresh. LATAPOXY 300 Adhesive is a factory-proportioned kit consisting of epoxy resin, hardener and chemical resistant silica filler. LATAPOXY 300 Adhesive can be used in interior and exterior (see limitations) walls and floors, wet and dry areas.

For heavy duty commercial chemical resistant installations in food processing areas, commercial kitchens, restaurants, etc. Also use LATAPOXY 300 Adhesive to install all types of ceramic tile, marble and natural stone over post-tensioned and precast floor systems. Also recommended for rubber flooring and wood block floors and the installation of green marble, white marble and agglomerate marbles that have a tendency to stain, darken or warp when installed with water-based installation materials.

Note: The Tile Council of North America recommends the use of epoxy adhesives and grouts for thin-set installations on suspended concrete slabs and for floors and walls when chemical resistance is required.

• Water cleanable.
• No flammable solvents are required to clean tools or finished work.
• Ideal for installing moisture sensitive marble and agglomerate tiles.
• Ideal for the installation of resin backed tile, mosaics, stone, and agglomerates.
• Non-staining on white and light-colored marble.
• High bond strength.
• Maximum chemical resistance.

• Concrete
• Ceramic tile and stones
• Exterior glue plywood*
• Concrete masonry
• Brick masonry
• Non-water soluble cut-back adhesive
• Vinyl or other resilient tile*
• Cement mortar beds
• Gypsum wallboard*
• Cement plaster
• Cement terrazzo
• Plastic laminate*
• Cement backer board**
• Steel

Product Reviews

(14 Ratings, 1 Review)

Average Rating:

Great product, shocking price! Jeannie (Denver) 2/20/2010 10:58 AM Latapoxy 300 is a fantastic product! Obviously the price is ridiculous, but when it is the only product of it's kind on the market, I guess they can charge anything they want. I am gluing rainforest green marble 6" square tiles to HardiBacker on my bathroom floor. (The other adhesive I tried didn't stick!) After curing for 24 hours, it looks like these tiles will stick forever - when archeologists unearth my bathroom in 1000 years it will look just the same as it does today. Because I'm making a very complex pattern, the hardest part is to determine a recipe if you cannot mix the entire pouch together without throwing away most of it. FYI: use 2 oz of Part A + 3.5 oz of Part B + 14 oz of Part C - the result is a thick paste that is hard to stir without breaking your paint stick. You have about an hour to lay your tiles, but you can slide them around for quite a while (maybe another 2 hours) to position your tiles just perfect. Wait 24 hours before walking on it! Hope I never need to remove one of these tiles - it would probably require a Jackhammer! Wear clothes that you plan to throw away because Latapoxy makes a gooey mess - dribbling strings of glue that are easy to wipe off your tiles but will never come out of your clothes.